Dakota Durango Forum banner

Fuse panel diagram

12K views 7 replies 4 participants last post by  C_elliott83  
#1 ·
Anybody have a diagram of the fuse panel as in what fuse runs what?

Mainly looking for the towing fuse. I have a light up ram head hitch cover but it doesnt light up so im thinking its the fuse.

Also whats the trick of getting the panel cover off inside the drivers door mine seems stuck and i dont wanna break it
 
#2 ·
Just give the panel door a decent tug. They fit tightly.

As far as towing fuse. I believe the towing plug is wired into the rear lights harness. Could be a bad plug connection.
 
#6 ·
If the truck has FACTORY tow, then the lighting pins run directly off the corresponding circuits in the truck. The TRAILER fuse (which would be fuse C in the PDC under the hood) is only feeding the AUX power pin in the 7-way.

If you have the DEALER OPTION tow package, you will not have a trailer fuse in the PDC. There will be a standalone fuse holder mounted somewhere under the hood which feeds a relay pack mounted behind the driver's taillight.

If it is a simple plug and play kit, there is a plug behind each taillight and a logic box somewhere between them and the trailer connector - again this runs completely off the internal truck circuits and there are no extra fuses.