[danbap]

how important is having a intercooler? ive spent about 5 hours trying to get it to work but i dont think its going to happen????? ive tried but there is no room in a gen2 quick response please im still fucking with it

dan.

 

[96daksport]

Thers a dued on here with a primered up gen 2. I know his real name is ed cant remember his exact username.

He would know the answers.

 

[mopar318]

What do you mean you cant fit an intercooler? I fit quite a large one actually. I dont have AC though. so theres no condensor in the way.

And its not primer you bitch. Its single stage matte black. hehe.

 

[96daksport]

^^told ya^^

 

[danbap]

yeah its mopar318, but i dont have a bender or a welder............and his intercooler is a different setup then mine is. hopefully he will give my some advice tho.

 

[danbap]

i was writeing while you where mine is a longer one and it flows in one way and out the other

 

[mopar318]

i was writeing while you where mine is a longer one and it flows in one way and out the other

I dont have a bender I buy mandrel bends and weld them together. You can use couplers if you dont have a welder. Post pictures of your intercooler.

You may have to run the intercooler under the truck and make it so the core faces down toward the ground. All you do is put a flap behind it and its will tend to force the air into the intercooler.

 

[danbap]

well thats what i was planning on doing but with the pipe and couplers and 90s i do have i couldn;t figuer it out.

http://www.need-4-speed.com/procharger3.jpg

mine is like the one in the back left

 

[danbap]

where do you get your pipe from??? pre bent or do you have them bend it???

 

[mopar318]

where do you get your pipe from??? pre bent or do you have them bend it???

I get them prebent. I have my own supplier for mandrel bends now that I get them pretty cheap from

You can get them from www.mandrel-bends.com