Dakota Durango Forum banner
41 - 60 of 180 Posts
Discussion starter · #42 ·
Did you already buy a window switch?
 
Discussion starter · #45 ·
Did you go with the MSD brand? I may still get one that way I can manually shift and not have to worry about pushing the button.
 
Discussion starter · #47 ·
I called ngk and they recommended one step colder plug. He gave me the part number 2667. When I looked it up I found that it's an iridium plug. Is it safe or ok to use an iridium plug?
 
Discussion starter · #51 ·
NGK 4644 is the same heat range as the iridium plug.
 
Discussion starter · #55 ·
Platinum are the plugs that you don't want to run with nitrous. I run the NKG's 1 step colder. Plus I ran 104 octane gas too the last time I sprayed it which helps
Good deal. I'm just going to run the ngk 4644 instead of the iridiums. Unfortunately I still have my stock cats so I guess I will have to run 100 octane unleaded pump gas.
 
Good deal. I'm just going to run the ngk 4644 instead of the iridiums. Unfortunately I still have my stock cats so I guess I will have to run 100 octane unleaded pump gas.
100+ unleaded isn't cheap. Goes for about $10 a gallon around here
 
Discussion starter · #58 ·
8.50 here.
 
Discussion starter · #59 ·
I called my local race fuel distributor to verify and it's 8.25 for vp 100 unleaded and 7.25 for vp 110 leaded. It's probably not a good idea to run leaded fuel with the stock cats and 02 sensors. I'm wanting to punch them out if Ryan is able to remove the CEL with SCT on my newer PCM.
 
41 - 60 of 180 Posts