I own a '03 Dakota R/T. My sway bar bushings are shot. I went to autozone and ordered a set of Energy Suspension bushing that were listed for my truck. The bushings didnt even come close to fitting.... the front was a bit too small and the rear was WAY too small ..... has anybody replaced theirs and know the size they were?
Sway bar bushings
Forseti
1 - 8 of 8 Posts
I own a '03 Dakota R/T. My sway bar bushings are shot. I went to autozone and ordered a set of Energy Suspension bushing that were listed for my truck. The bushings didnt even come close to fitting.... the front was a bit too small and the rear was WAY too small ..... has anybody replaced theirs and know the size they were?
Joined
·
3,047 Posts
There are two different sets. The ones you need for the front are the 30mm ones for the R/T sway bar. You probably have the 28mm ones for the regular sway bar. Now the rear i have no idea about.
Joined
·
3,871 Posts
someone made a thread to replacin the same bushin w/ ploy bushins and how much better their dak handled afterwards. problem they had was the bolt hole was a tad to small for the factory bolt but a lil borin out fixed it.
Joined
·
3,047 Posts
Oh and forseti, what part of orlando are you in? I go to UCF, so I live in an apt, near there.
I live in Avalon Park ...... I had the 30mm bushings and they were too small ... I was just out in the garage and I wrapped a piece of paper around the bar then measured it .... I think its 33mm ..... but I'm not sure if I can trust the way I measured it....
Joined
·
3,047 Posts
oh cool, your somewhat near by then.Forseti said:
someone out there has to know... please chime in anytime now. i want to know this too.
1 - 8 of 8 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
