Everyone talked me out of the tough country lift so I am doing shackles in the back and torsion keys up front as well as the 3" body lift. Will these fit with the 4.5" backspace 17x9? http://item.mobileweb.ebay.com/viewitem?itemId=360691255907&cmd=VIDESC.
Will they fit?
Bnbz28
1 - 17 of 17 Posts
Everyone talked me out of the tough country lift so I am doing shackles in the back and torsion keys up front as well as the 3" body lift. Will these fit with the 4.5" backspace 17x9? http://item.mobileweb.ebay.com/viewitem?itemId=360691255907&cmd=VIDESC.
Joined
·
1,359 Posts
They should fit no problem depending on what tires you want to put on them
Joined
·
277 Posts
Just curious why they talked you out of it
Really the same reasons my dad heated his back in 99. If u take the truck offload at all parts start breaking.. My dad had mounts tear off the frame numerous times and his truck was a street princess. The ts lift and body lift leaves little to break even tho mine isn't going to be beaten off road and its over $1000 left in the bank
Joined
·
277 Posts
My old Durango. We used to take to glamis....and let just say a few drinks later the Durango was leaving the ground lol. Broke the driver side shock mount on the control arm....I always thought that was the dumbest design ever. I just drilled the hole all the way through and put a grade 8 nut and bolt with some lick washers and never had the problem again
Joined
·
277 Posts
Yup just a 3in ts and a 3in body....my favorite vehicle ever
How much clearence did u have? I'm debating on what I want to put on mine. 285/70/17,295/70, 305/70 . Those are 32.8, 33.1 and 34. Just wondering how big of a tire I can fit with minimal trimming. I've got 4.56s going in front and rear probly this weekend...
Joined
·
277 Posts
all you would be trimming would be your inner fender I just use to dremmil and trimmed probably a couple inches out it's not noticeable at all and I didn't even have problems rubbing at 4 rack with suspension under load
Joined
·
277 Posts
Can't wait to see
wheels and tires came in today, unfortunately I already have this truck sold.... I was able to bolt them on for a few pics tho. damn it looks sick. about perfect offset just barely rubs the inside of the fender flare on the back, minor trimming and it will be good. ill post them up tomorrow.now I have to lift my rt so these fit lol
1 - 17 of 17 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
