I wired up an overhead computer in my truck tonight and can't get the damn thing to even turn on. I've checked all the wires a good dozen times and everything is right. I get nothing at all when I turned the truck on. I have the power line ran to the #11 fuse and the ground is good. The CCD wires are taped into the OBD port. I don't have the temperature sensor wires hooked up yet but I wouldn't think that would prevent it from turning on. Any ideas?
Overhead computer
AndrewR/T
41 - 51 of 51 Posts
Joined
·
26,838 Posts
lets see what it looks like
Joined
·
25 Posts
thats aawesome but in your post for the wiring harness it say "not this one" and has a a pic of the one i have. ill post a pic.
Joined
·
26,838 Posts
what year truck is it going into? Also if it a 2004 and you have that console that says i dont do then you have the wrong overhead (sorry to say) you need on like the first pic for a 2004. Also i make the harness for the older console now but thats $39
Joined
·
25 Posts
i have a 2004 dakota and im trying to install a 2000 durango console.
![Image]()
this is the end where i cut the wiring harness
![Image]()
![Image]()
![Image]()
![Image]()
this is the end where i cut the wiring harness
Joined
·
1,864 Posts
Will not work. In 1997-2000, they used a different communications system. I forgot what it was. In 2001 to 2004, they used PCI Bus. A completely different system. The one you have will not work since there is a difference in comm. system.
You need to get a overhead from a 2001-2004 Dakota or a 01-03 Durango.
You need to get a overhead from a 2001-2004 Dakota or a 01-03 Durango.
Joined
·
25 Posts
Well damn. Anyone wanna buy mine then? Haha
Joined
·
25 Posts
Idk what it is worth?
Joined
·
25 Posts
Ok cool I don't remember how much I payed for it. It was a long time ago
41 - 51 of 51 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
