Need Help, HVAC.

InTeNsE98RT · Apr 2, 2010

Ok so I took apart my HVAC panel to replace the lights with LED's and install my blackcat HVAC face. I put it all together EXACTLY like I took it apart but now when I have my heat/A/C running its stuck on defrost. I can turn the knob to any position but it still stays on defrost...

Anybody know whats up?

InTeNsE98RT · Apr 2, 2010

Ok. I just noticed that the clear rubber piece with all the colored hoses on it that attaches to the back of the HVAC controls has no vacuum. It had vacuum when I removed it cause I remember it sucking in air when I pulled it off. So I have a vacuum problem. Its hard to see where all the little colored hoses go under the dash but I know the yellow one goes to a little ball type canister directly under the dash. Anybody have any ideas? I hope I didnt just fuck up my HVAC system over some LED's...

dkjones96 · Apr 2, 2010

Start the car, turn everything off and listen for a sucking noise form somewhere. Doubt you fucked the ac for just some leds lol

Rebel13 · Apr 2, 2010

You removed the whole AC panel? I just unscrewed mine and pulled it out a little, then removed the face. I didn't detach anything from the back.

InTeNsE98RT · Apr 2, 2010

I removed all the pieces again and reinstalled them now everything works. I dont know how but hey I will take it

InTeNsE98RT · Apr 2, 2010

Rebel13 said:
You removed the whole AC panel? I just unscrewed mine and pulled it out a little, then removed the face. I didn't detach anything from the back.

I was originally planning on doing some solder work to the back of the panel with the blackcat LED's but I canceled the blackcat LED's and bought some of my own that just pop in. Thats why I had to disassemble the panel.

Rebel13 · Apr 2, 2010

Oh I see.

Need Help, HVAC.

InTeNsE98RT

InTeNsE98RT

dkjones96

Rebel13

InTeNsE98RT

InTeNsE98RT

Rebel13

Top Contributors this Month

Recommended Communities