Can you guys post pics of dak's with ccw's? Sp16a's and 505a's would be great.
ccw pics
sick 660r
21 - 40 of 91 Posts
Joined
·
8,647 Posts
I wasn't sure if you did or not
:mullet:
Joined
·
2,805 Posts
Here you go
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
Joined
·
2,805 Posts
Just found my invoice. Mine are 19x9 and 19x10 in the rear. The backspacing was 6.25 for the front at least. As you can see there is a good 2 inches still on the inside. So maybe a 19x13 would fit, but damn I would be afraid of that cost. Mine were shipped with tires for 3200, but I got a reverse contour set they still had left over that only ran 2000 vs the 2800. I made out come to think of it.looks good! I cant decided between the 505's or the sp16's. Atleast I know that tire setup will work but im trying to go as wide as possible
Joined
·
2,805 Posts
Oh yea one other thing. If I were to do it again I would get the SP500's. Cleaning these is nuts. The SP16's I can only imagine being worse.
Joined
·
4,467 Posts
Nice garage & truck...lucky to have a garage like that!
Joined
·
2,805 Posts
Thanks, I will be lucky to have it for another 2 years max. Until Uncle Sam sends me somewhere else.
Joined
·
4,467 Posts
:sorry: Still have time to enjoy it though!!
Joined
·
2,805 Posts
Oh trust me I am. Can't wait to have my black truck back in there.
Joined
·
8,647 Posts
yeah, those look simple to clean to what I am about to encounter.
Your pics looks damn good though!!
Your pics looks damn good though!!
Joined
·
2,805 Posts
All cleaned up for Carlise. :mullet:
Joined
·
463 Posts
They are 19x10's all the way around with 275/40-19 kumho spts on them now.
Not on the same truck though any longer
Joined
·
8,647 Posts
what polish are you using? A mothers ball or anything special? I can have the guys polish the wheels while I am at work, but we don't have a small polish wheel, just a few orbitals. I think a dremel will work while in the smaller crevices.
Joined
·
2,805 Posts
For the face and the big openings I use the mothers powerball and the power metal. The small spaces its all elbow grease.
Joined
·
8,647 Posts
Good advice, I am thinking powerball. Honestly, these might be coated chrome. I am going to talk with the vendor we use, and make sure they can do it correctly.
I think sic needs a big 13 foot wide wheel, with a 4 inch lip in chrome in the rear, that would be insaane!!
I think sic needs a big 13 foot wide wheel, with a 4 inch lip in chrome in the rear, that would be insaane!!
Joined
·
2,805 Posts
That would be sick, but at 750 a wheel, yikes.
Joined
·
8,647 Posts
Yah, but these wheels arn't cheap unless you find a deal. In my case, it is cheaper to by these, and have them recoated, i'm still at less than price from ccw themselves.
I had found 4 17x13's for 1800 - shipping, same wheel as I just bought. Just got to shop around, or by a rear set and then a front set, just gotta have patience.
There is a nice set of 19's and 20's for sale on this site with tires, I believe they are 9x wide.
I had found 4 17x13's for 1800 - shipping, same wheel as I just bought. Just got to shop around, or by a rear set and then a front set, just gotta have patience.
There is a nice set of 19's and 20's for sale on this site with tires, I believe they are 9x wide.
Joined
·
2,805 Posts
Why not check out he guy on here. He does really good work and might be able to beat that price.
Joined
·
4,711 Posts
Im fully aware of the price for both the tires and the rims but im starting to want something lighter and smaller with a wider tire than the 20" r/t's I have. According to their website a 18x10 and 19x13 setup cost 2850 and the rear tires are 480 a piece. A pretty penny but worth it in my opinion but its a mod that will have to wait a while.
Here is the tire
http://www.michelinman.com/tires/ultra-high-performance-sport/pilot-sport/#sizes-and-specifications
Here is the tire
http://www.michelinman.com/tires/ultra-high-performance-sport/pilot-sport/#sizes-and-specifications
Joined
·
2,805 Posts
That would be sick.
Joined
·
8,647 Posts
Shipping would eat me alive, $100 each way. http://www.wheeltechnologies.com/ I have used them before personally,but now being with this company, we get a bit of a discount. It comes out to = or a little less than the vendor on this forum. Once again, i've dealt with billit before.
21 - 40 of 91 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
