No one around here sells the chrome white bulbs so I have an order being shipped from ebay. These amber bulbs came with the corners.
![Image]()
![Image]()
![Image]()
Clear corners arrived
Mastec
1 - 16 of 16 Posts
Joined
·
6,063 Posts
Looking good man
I need to get a new set, got a damn crack in my drivers side one :rant:
I need to get a new set, got a damn crack in my drivers side one :rant:
Joined
·
7,388 Posts
they do look reall nice.. i might have to do that as well..
Joined
·
26,838 Posts
Are these them man?
http://cgi.ebay.com/ebaymotors/97-0...m290295409445QQitemZ290295409445QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories I was wondering because I need a pair. But whats the white/green wires for on the corners of these? Or can you use the stock ones?
http://cgi.ebay.com/ebaymotors/97-0...m290295409445QQitemZ290295409445QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories I was wondering because I need a pair. But whats the white/green wires for on the corners of these? Or can you use the stock ones?
Joined
·
1,547 Posts
That's them. The wires are there so you can splice into the factory wires. The factory socket will not work in these, it's held on with two things. (Brainfart right now) The clear setup is held on with 4, as you can see inside the red circle. If you install the factory plug there is a good chance water will get inside the light. Took me 5 minutes to do both.
Factory
![Image]()
Aftermarket
![Image]()
Factory
Aftermarket
Joined
·
1,547 Posts
I ordered mine from another company, Xtralights.com, who had to wait for shipment as they were on backorder. As soon as they get a shipment they sent them out in the order the orders were received. Very popular. I would say it shouldn't take more than a few days to a week. I waited one month and two days.
Joined
·
1,547 Posts
As for wiring, get some heat shrink tubing and splice connectors. Splice the new wires into the factory wires then heat shrink some tubing on it. Good to go.
BTW, they give you more wire than you really need. I cut off all but 3 inches and spliced into that
BTW, they give you more wire than you really need. I cut off all but 3 inches and spliced into that
Joined
·
1,547 Posts
If the headlights are the same I would think that they would work. If that's the front of your truck in your sig then I would say yes just from looking at it. I am sure someone here with more knowledge of the 04's will chime in.
1 - 16 of 16 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
