I'm stock height and am rolling on 20's with 275/45 rubber, need to do a drop...badly! Either 2/3, 3/4 or 3/5. Can I do any of these with the size tires I am running right now? If you have any of those drops and are running 20's, what size tires are you using? Any pictures? Thanks everyone.
Dropping with 20's
b14kdak
21 - 36 of 36 Posts
And yours is dropped what? If 2/3 then I was thinking about just buying new front tires. Who cares if they're mismatched lol
Here is my R/T with a 2/3 drop. I used DJM 2" control arms and 3" blocks. I am running 275/45/20 Fuzion ZR1's. I have minor rubbing over large bumbs
![Image]()
![Image]()
This picture is with DJM springs as well to give a 4/3 raked look. I had A LOT of rubbing with this set up and 275/55/17 Proxes.
![Image]()
This picture is with DJM springs as well to give a 4/3 raked look. I had A LOT of rubbing with this set up and 275/55/17 Proxes.
Joined
·
1,202 Posts
wow i wish mine was that low up front idk how urs is lower up front that mine??? i think i must hav got sent 3" springs for a v8 when i hav a v6 thats my only explanation.... 3/4 drop (3" springs 3" leafs 1" block) 255/35/20 front and 275/35/20 rearJust incase you haven't made up you mind yet I figured I'd add to the mix with a 3/5 drop.
My old truck with 255/35/20 minnor rubbing on the front on big bumps.
![Image]()
![Image]()
wtf :huh:Here is my R/T with a 2/3 drop. I used DJM 2" control arms and 3" blocks. I am running 275/45/20 Fuzion ZR1's. I have minor rubbing over large bumbs
![Image]()
![Image]()
This picture is with DJM springs as well to give a 4/3 raked look. I had A LOT of rubbing with this set up and 275/55/17 Proxes.
![Image]()
How are you able to manage that I wonder, that's a 3/4 on a non-R/T, which is what I was looking at
Now I'm baffled, lol
Like I said I do have rubbing, but its worth it to me.
How bad when turning? I already rub at full lock, I can only imagine it's worse... I mean I have to DD this thing, I need to make sure it's practical for me.
I don't mind rubbing, but I can't compromise turning ability or being able to go over bumps.
Joined
·
1,097 Posts
Here is my R/T with a 2/3 drop. I used DJM 2" control arms and 3" blocks. I am running 275/45/20 Fuzion ZR1's. I have minor rubbing over large bumbs
![Image]()
![Image]()
thats how mine will sit with 275/45/20 all around..but i have a larger gap in the front due to the 255/35/20's..
I would like to see that as well. I would like to put some DJM springs up front and run that size tire up there too.
Well when I buy Weezy's coils, and drop the front end 3" and get B-ry's hanger and drop the rear 3", I'll probably be forced to get some 255/35s for the front, unless by some miracle 275/45s will work all around. I know you've done it gmac, but I really don't see how :huh:
Joined
·
1,202 Posts
not a chance man.... unless u do some serious trimming. i switched to 255/35/20 when i did a 2" drop cuz i rubbed at full turn...
heres 255/35/20 front and 275/45/20 rear.... with a 2/3 drop
21 - 36 of 36 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
