Dakota Durango Forum banner
1 - 5 of 5 Posts

·
Premium Member
Joined
·
560 Posts
Discussion Starter · #1 ·
A few weeks ago, 99 Durango 5.2l 4wd. I can hear the motor running but no fluid comes out. Wipers are working fine. I just added new wiper fluid the other day cause i thought it was just low, so now i cant see in the tank. I guess pull the tank off and empty it and go from there, maybe its clogged? Any suggestions?
 

·
Premium Member
Joined
·
560 Posts
Discussion Starter · #5 ·
Yah i had cheap stuff in there before, and then we had cold (cold for portland) weather here a few weeks back around +10 degrees or so and thats when it quit working I think. I put the cold weather oarnge stuff in there this time.

I found out where the fluid was going, but dont know why. The fluid is squirting out of the bottom of the little plastic splitter that goes to the passenger and drivers side sprayers.

Splitter disconnected from the lines, fluid from tank line still attached.



Here is the splitter upside down showing the hole that the fluid is squirting out of.



The splitter is just a cheap fealing plastic peice with a spring in it. I took it apart and water flows through all holes just fine. When I hooked it back up to the lines some fluid started squirting out of the passenger side sprayer but not much. With the splitter not attached to the "to sprayer" lines, fluid came out of the both nippels and the bottom hole on the plastic peice. I am wondering if there was a cap or something like it on the bottom of that plastic splitter that is gone now.

I also tried pull the hoses from the sprayers to see if they were clogged. I had an issue getting my windshield wiper arms off, i couldnt. I unbolted them and pulled/pryed/wiggled until i thought i was going to break them, just couldnt get them off. So i could not completely take the plastic cover off to see everything better. On top of that when I tried pulling the hose off of the passenger side sprayer, without hardly and force I snapped the plastic spray nozzle where the hose attaches to so I will have to replace that now.

This is one of those little highly annoying things i would like to fix. Any help getting the ww arms off would be great.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top