Dakota Durango Forum banner

will Kenne Bell Supercharger work on a 3.9?

4504 Views 5 Replies 6 Participants Last post by  Rod-DODGE3.9V6
will Kenne Bell Supercharger work on a 3.9? just wrondering be4 i buy the kit and if so wat would i have to do to make it work
1 - 1 of 6 Posts
wouldn't be cheap. like mentioned, the snout is really the problem, everything else would work fine. you could make it work with a custom made spacer and pulley to run an independent belt to it, but you would also have to ditch the clutch fan and go electric or the belt won't clear the clutch fan. centrifugal is much easier, but if you did make the KB work it would be a fun ride with all that extra torque down low.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.