Dakota Durango Forum banner
1 - 6 of 6 Posts

·
408,R3,Indy Heads,Twin66s
Joined
·
2,744 Posts
You will need a V8 wiring harness or run the two extra injector wires. Trans will bolt right up. You need a 360 flexplate or flywheel. I have one if you need it. Upgrade the cam if not the heads as well. Also could do a better intake (M1 for example). If you really want to do it and are going to rebuild it anyways, make it a 408.
 

·
408,R3,Indy Heads,Twin66s
Joined
·
2,744 Posts
Yes they came with Holley TB's. Looks like it is going well.
 

·
408,R3,Indy Heads,Twin66s
Joined
·
2,744 Posts
What do you mean by Jeep trans? You just would need a 46RE in 4x4 form.
 

·
408,R3,Indy Heads,Twin66s
Joined
·
2,744 Posts
You can build a 42RE to be super strong, but unless you are straight up drag racing, build a 46RE. I do agree with the above, put it in and see what happens, unless it's already bad.
 

·
408,R3,Indy Heads,Twin66s
Joined
·
2,744 Posts

·
408,R3,Indy Heads,Twin66s
Joined
·
2,744 Posts
My bad. I was thinking you had a 318 and was going to a 360. Yes, you need a Dakota pan. :sorry:
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top