Dakota Durango Forum banner

The Powder Coating Thread

20K views 16 replies 10 participants last post by  9t9-5.2 
#1 ·
This thread is for people to post pictures and tips regarding powder coated parts. Powder coating your parts can greatly improve their appearance, and make them much easier to keep clean over the long term.
 
#3 ·
Translucent candy red powdercoating - K&N aluminum air hat, engine bay brackets, TDC billet caps/handles, etc.

work performed by http://www.vegaspowdercoating.com
 

Attachments

#4 ·
Translucent candy blue powder coating - multiple part styles. Dark parts were powdercoated bright silver/chrome prior to having the blue applied.

work performed by http://www.vegaspowdercoating.com
 

Attachments

#5 ·
Mopar M1-2bbl intake manifold, translucent candy blue.

High temperature tape was used to mask off the surfaces that mate with the head, bolts, or other hardware - that way the powder doesn't interfere with the gaskets or crack once the bolts are cranked down. High-temp cone plugs were used to make sure the injector bosses are free of coating.
 

Attachments

#9 ·
front suspension parts


rear suspension parts


engine bay bracketry
 
  • Like
Reactions: porksoda
#10 ·
cermakrome coated M1 intake,s/c tubing,and airhat to go with the chrome plated goodies.
 

Attachments

#13 ·
These are the shifter brackets I got back as sample pieces. Wanted to see how the green flecks looked. Decided to go with just wrinkle black. If I could have done the frame too, as well as all of the suspension, I would have been all over this.

 
#14 ·

dont have a pic of them by themselves but heres my 4.7l valve covers done in a brushed aluminum and below is when i had them polished
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top