[SinCity R/T]

This thread is for people to post pictures and tips regarding powder coated parts. Powder coating your parts can greatly improve their appearance, and make them much easier to keep clean over the long term.

 

[SinCity R/T]

Mopar M1-2bbl intake manifold - gunmetal grey.

Work performed by http://www.vegaspowdercoating.com

 

[SinCity R/T]

Translucent candy red powdercoating - K&N aluminum air hat, engine bay brackets, TDC billet caps/handles, etc.

work performed by http://www.vegaspowdercoating.com

 

[SinCity R/T]

Translucent candy blue powder coating - multiple part styles. Dark parts were powdercoated bright silver/chrome prior to having the blue applied.

work performed by http://www.vegaspowdercoating.com

 

[SinCity R/T]

Mopar M1-2bbl intake manifold, translucent candy blue.

High temperature tape was used to mask off the surfaces that mate with the head, bolts, or other hardware - that way the powder doesn't interfere with the gaskets or crack once the bolts are cranked down. High-temp cone plugs were used to make sure the injector bosses are free of coating.

 

[SinCity R/T]

Multiple parts with "silver vein" textured powder coating.

 

[porksoda]

Metallic Black R/T wheels (originally chrome wheel):

Before:

After:

Semi-Gloss Metallic Black lower control arms:

 

[porksoda]

Gun metal and metallic silver powercoat on LT1 parts we had done:

Before:

After:

 

[coop]

front suspension parts

rear suspension parts

engine bay bracketry

 

[loudrango]

cermakrome coated M1 intake,s/c tubing,and airhat to go with the chrome plated goodies.

 

[jmaack727]

Merecedes silver M1 Ill post more when I get some pics.

 

[Hollandcodyman]

Gloss Black Wheels

 

[Brian Esser]

These are the shifter brackets I got back as sample pieces. Wanted to see how the green flecks looked. Decided to go with just wrinkle black. If I could have done the frame too, as well as all of the suspension, I would have been all over this.

 

[moparman_2004]

dont have a pic of them by themselves but heres my 4.7l valve covers done in a brushed aluminum and below is when i had them polished

 

[9t9-5.2]

dont have a pic of them by themselves but heres my 4.7l valve covers done in a brushed aluminum and below is when i had them polished

Nice! :woot:

 

[jhoppy16]

Wheels Powdered neon green

Wheels powdered Black w/ Clear coat

Wheels powdered Black w/ Clear coat

 

[9t9-5.2]

metallic silver powder coat with airbrushed lettering covered with matte clear powder coat.