[Dj Wolf]

if you go full aftermarket just get a sender from jegs to use your stock gauges like me or you can just mount your stock pump assembly to the fuel cell. it depends on your fuel requirements and budget. Either way the stock gauges will work, they will be more accurate with the stock assembly though unless you reuse just the stock sender with a new bracket.

 

[Dj Wolf]

here is how to mount the stock assembly,
http://www.customdakotas.com/forums/i-have-question/9401-jeep-fuel-pump-adapter-ring.html

the sender you need if going external,
547-371-240-03 or 547-378-240-03 depending on length