Dakota Durango Forum banner
1 - 15 of 15 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter · #1 ·
so recently i thought it would be a good idea to put a sub box in the back seat of my dakota. i would like to remove the driver side section of the back seat. i was wondering if any one else has done this. i would be cutting the plastic storage so i could make the box as big as i can for volume. any other ides or tips and tricks would be great. i havent done any audio before so i dont know a whole lot
Thanks Greg
 

·
2005 IASCA WORLD CHAMPION
Joined
·
860 Posts
if you go to caraudioclassifieds.org there are a few guys building boxes in their ext cab daks.go under build logs and you'll see them.maybe you'll pick up a few ideas.good luck.
 

·
<---1 of none!
Joined
·
6,583 Posts
so recently i thought it would be a good idea to put a sub box in the back seat of my dakota. i would like to remove the driver side section of the back seat. i was wondering if any one else has done this. i would be cutting the plastic storage so i could make the box as big as i can for volume. any other ides or tips and tricks would be great. i havent done any audio before so i dont know a whole lot
Thanks Greg
something like this? I built mine on top of the tool box. makes a good flat base.
 

Attachments

·
Banned
Joined
·
25,820 Posts
Stock tray to hold 2 10"s:


My next project is to make a box/seat all in one! When money allows that is, already have the plans to make!
 

·
Se habla Español.
Joined
·
1,424 Posts

·
Premium Member
Joined
·
1,388 Posts
Like this? My set-up out dated now I'm sure but I had this in the truck when I was younger and into systems, but it's still in the truck and hits hard just not my style anymore.


 

·
Registered
Joined
·
84 Posts
Discussion Starter · #10 ·
well i started on my box this weekend i think its a little big i have 2 12" rockford fosgates P1s for now. Ive had them kicking around for a year or so. I think i will be buying a 600W amp some time later on before i put the truck on the road in the spring. But its a start
Greg
 

Attachments

·
Se habla Español.
Joined
·
1,424 Posts
well i started on my box this weekend i think its a little big i have 2 12" rockford fosgates P1s for now. Ive had them kicking around for a year or so. I think i will be buying a 600W amp some time later on before i put the truck on the road in the spring. But its a start
Greg
I like where this is going.
 

·
Registered
Joined
·
84 Posts
Discussion Starter · #14 ·
The box is 48" wide, 16" tall and 15" depth outside and i used 3/4 MDF. Im not sure what cubic feet is recommended because I lost the papers. How should I port the box like what size of PVC?
 
1 - 15 of 15 Posts
Top