Dakota Durango Forum banner

1 - 3 of 3 Posts

·
I know nothing
Joined
·
1,247 Posts
Discussion Starter #1
any ideas, i am either going to buy a stock v8 tb or buy a stock v6 and mod it. I dont have a problem of cutting and have ported one before so i know how. Any pros/cons of the two? Which would be better? Also, i know about the throttle cables being different, i am just discussing performance....
Thanks for any help!
 

·
Registered
Joined
·
504 Posts
I would stay with the stock V6 TB and open it up for more flow. A stock V8 has on average a flow rate of 550 CFM. A stock V6 is around 350 CFM on average. Taking the V6 to around 400 to 425 CFM is about the limit unless you plan on changing the cam and opening up the heads.

Too much air flow will destroy your low end performance.
 
1 - 3 of 3 Posts
Top