Dakota Durango Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,756 Posts
If anyone wants to see my center console sub box I just finshed up for a stick shift truck I could get some pictures/dimensions. It's not totally finshed as I'm going to add some kind of arm rest on top still and some storage to the cutout for the shifter but its carpeted and everything. I think I might make a thread for it once I finsh it up. And it's .85 cu. ft. for anyone wondering that, but it could have a couple inches added on to the end if someone else were to need more cu. ft. then that. It's got a 10" CVX Kicker in it and that called for .8 min.

Where/how are you putting the speakers in it? How does it fit in your truck? With my truck I think I had 28" from the back wall to the shifter console, I'm guessing your's goes under the dash? What kind of seats does your truck have or do they even have different style seats for these? I had the third seat in the middle that I took out with mine and made my box 11" wide, man was it a tight fit to get in there. The seats just barely slide forward and back now haha.
 

·
Registered
Joined
·
2,756 Posts
Yes if I were to do mine over I would have went from 11" at the back down to like 10-10.5 giving it like a T-shape as there is more room at the back, or maybe use something leather-like for the sides so there isn't as much friction. 11" will work but like I said your seats are going to be hard to move unless the center console truck seats are different then the 3rd seat ones are.

You haven't done a test fit with it yet? Whats the inside of the box look like? Is it totally hollow or is it seperated in the middle? Where are you going to put the 6.5's in it?
 

·
Registered
Joined
·
2,756 Posts
The 6.5" Component set is going in the doors. The Box is hollow on the inside and should work out to 1.2 cubic ft, perfect for the SE10, ported. I'm probably going to use vinyl unless I find some black fabric that I like. And some friction is ok, as I never move my seats.
Oh ok I was trying to figure out how you were going to put 6.5's in it to. Wal-mart sells I think it was 72"x48" black auto carpet which is what I used if thats what you were looking for. There is A LOT of friction with mine, enough to where I had to make sure to put my seat where it is always going to be and the passenger seat almost all the way back so anyone can fit.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top