Dakota Durango Forum banner

[QUICK TIP] Enable/Disable horn chirp on RKE lock

24048 Views 9 Replies 9 Participants Last post by  carsteynf
This is the procedure for enabling/disabling the horn chirp when you press the lock button on the Remote Keyless Entry transmitter.

1. Enter vehicle, close all doors, and fasten seatbelt (to avoid unwanted chimes)
2. Place key in ignition and turn to ON (do not start)
3. Press and hold UNLOCK button on the transmitter for five seconds
4. While still holding UNLOCK, press the LOCK button on the transmitter for one second then release both buttons.
5. You will hear a single chime indicating programming is complete.

This is a toggling option. To change it back, simply repeat the process.
1 - 2 of 10 Posts
It should be 97-03 Durango/04 Dakota. It's the same in the 99, 00, and 02 manuals, so I assume it carries through the entire generation. The manuals I have for 04 Durango and 05 Dakota have the same procedure except you hold Lock then press Panic.. See if that works.
1 - 2 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top