I'm going crazy trying to get my chirp back on! I hear the chime at the end of the program but zero success
[QUICK TIP] Enable/Disable horn chirp on RKE lock
This is the procedure for enabling/disabling the horn chirp when you press the lock button on the Remote Keyless Entry transmitter.
1. Enter vehicle, close all doors, and fasten seatbelt (to avoid unwanted chimes)
2. Place key in ignition and turn to ON (do not start)
3. Press and hold UNLOCK button on the transmitter for five seconds
4. While still holding UNLOCK, press the LOCK button on the transmitter for one second then release both buttons.
5. You will hear a single chime indicating programming is complete.
This is a toggling option. To change it back, simply repeat the process.
1. Enter vehicle, close all doors, and fasten seatbelt (to avoid unwanted chimes)
2. Place key in ignition and turn to ON (do not start)
3. Press and hold UNLOCK button on the transmitter for five seconds
4. While still holding UNLOCK, press the LOCK button on the transmitter for one second then release both buttons.
5. You will hear a single chime indicating programming is complete.
This is a toggling option. To change it back, simply repeat the process.
1 - 1 of 10 Posts
1 - 1 of 10 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Dakota Durango Forum
A forum community dedicated to all Dodge Dakota and Durango owners and enthusiasts. Come join the discussion about modifications, troubleshooting, towing capacity, maintenance, and more!
Full Forum Listing
