There is alot of how tos for this I can message you some if you need. Its not bad just little pia details of pulling it and putting it back in. The way it sits you should be able to take a couple screws out and drop it through the bottom. That would make too much sense though. Lol
Sorry guys been on fb mostly posting. Here is an update. Picked up bumper and hood cheap. Needs repairs and paint. Need to fill gap from body lift. Still building years later. Hope I finish the front this month and be all set. 4" suspension lift and 3" body lift on 33s (for now). A lot more to come.
I have a 2001 slt Durango with a crack front differential housing at the top mounting bolts.. can i use a 1998 front differential housing for the 2001 ? Also can I take the axle shafts out of the broken housing and put them in the 1998 housing? Took of both covers and the inside looks similar.
02 Dakota 4x4 Quad Cab
Howdy folks :wave:
Wife and I are new to the Dakota world but not new to Dodges. We just picked up our new Colorado trail machine. It's an 02 Dak: 5.9/360 Magnum, auto (46re), AWD, 3.92 gears, a limited slip rear, and has just over 129k miles on the clock. Not a...
Hey guys i have a 99 dakota sport extended cab and ordered door pins from dorman 38403# part number and two of the pins are tapered. The stock ones are not and the new tapered pins are a little long and once installed the smaller end of the pin wiggles. Im wondering if anyone else had this...
What is the best year R/T to buy in terms of bang for the buck in modifications?
I'm in the market for another R/T and have found a few I like, but want to get something similiar to the 99 I used to have.
Pros and cons?
Thanks in advance.
Has anyone used AT-205 Reseal for rejuvenating the rubber on boots and bushings? I've got a 2002 Dakota and want to keep all the rubber flexible and prevent it from cracking. Any other suggestions for maintaining these parts?
Sent from my Pixel 3a using Tapatalk