Dakota Durango Forum banner
1 - 1 of 10 Posts

· Registered
462 Posts
KRC sells some good heads designed for blowers and they also sell the cams. If you have not done so now is a good time to take a look at the lower end of that engine. Crank, rods and bearings along with a set of good pistons designed for a blower.

With all of that added HP the stock set up will not last too long and sooner or latter something will break.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.