Dakota Durango Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
I'm in the process of doing the Hotchkis TVS kit on my 01 Durango & the kit says for the rear leafs to be installed with the end that curls upward's to go to the front & the end that curls downward to go to the rear. My problem is that my stock springs are installed opposite of that way. Do I install the springs the same way as the factory or the way the kit says to install them?? A quick response would be great as I'm trying to do the rear tonight & the front tomorrow. Thanks Russell :help: :help:
 

·
Home Owner....
Joined
·
2,565 Posts
on the Hotchkis, there should be a arrow that points to which way is the front.
 

·
Registered
Joined
·
27 Posts
Discussion Starter #3
The springs had stickers on them marked front but they were labeled wrong & their instruction manual was also wrong. If I tried to install them the way they had listed the axle would be about a foot back to line up with the locater pins. The jobs done & the D looks & handles great
 
1 - 3 of 3 Posts
Top