I love your conversion I have a similar concversion on my durango. Only my is 4wheel drive. I would sure love to see more pics of you build up and install of the engine and intercooler. I want a intercooler real bad just haven't found a good way to do it yet.
my 4bt cummins dakota
4
wasn't sure if anyone was interested but i'll throw up a thread about my truck.
i startednt this project when i was 15. i was into diesel pretty early and i wanted something a little differerent so i came up with the idea of a small truck with a diesel. i had it built and driving by the time i was 16 with alot of help from my dad. I've been driving my dakota as a daily driver since. last year i did some mods to the engine including fuel mods, a huge intercooler, twin turbo's, and a streight piped 4 inch exhaust.
here is some pictures
![]()
![]()
![]()
![]()
some big plans for the future i want to have new axles, transmission and a race suspension.
i also picked up another 4bt with a different injection pump capable of supporting huge hp. physicaly the pump can be capable of moving enough fuel for 1000+ hp. where as my current one can't support much more than 300hp worth, it also can't handle high rpm's very well.
anyways depending on the money situation i'm either gonna build up the new engine to hopefully around the 700hp mark.
or if money is a little tight then i'll just do some smaller mods on the current setup such as a major head port and probably hook up the nitrous kit that i've had for almost two years now.
plans are to get big power and then test the strength of the rest of the parts at the 1/4 mile and replace broken parts with stronger replacment parts
i startednt this project when i was 15. i was into diesel pretty early and i wanted something a little differerent so i came up with the idea of a small truck with a diesel. i had it built and driving by the time i was 16 with alot of help from my dad. I've been driving my dakota as a daily driver since. last year i did some mods to the engine including fuel mods, a huge intercooler, twin turbo's, and a streight piped 4 inch exhaust.
here is some pictures
some big plans for the future i want to have new axles, transmission and a race suspension.
i also picked up another 4bt with a different injection pump capable of supporting huge hp. physicaly the pump can be capable of moving enough fuel for 1000+ hp. where as my current one can't support much more than 300hp worth, it also can't handle high rpm's very well.
anyways depending on the money situation i'm either gonna build up the new engine to hopefully around the 700hp mark.
or if money is a little tight then i'll just do some smaller mods on the current setup such as a major head port and probably hook up the nitrous kit that i've had for almost two years now.
plans are to get big power and then test the strength of the rest of the parts at the 1/4 mile and replace broken parts with stronger replacment parts
