Dakota Durango Forum banner

my 4bt cummins dakota

75808 Views 74 Replies 40 Participants Last post by  McMopar
wasn't sure if anyone was interested but i'll throw up a thread about my truck.
i startednt this project when i was 15. i was into diesel pretty early and i wanted something a little differerent so i came up with the idea of a small truck with a diesel. i had it built and driving by the time i was 16 with alot of help from my dad. I've been driving my dakota as a daily driver since. last year i did some mods to the engine including fuel mods, a huge intercooler, twin turbo's, and a streight piped 4 inch exhaust.
here is some pictures

some big plans for the future i want to have new axles, transmission and a race suspension.
i also picked up another 4bt with a different injection pump capable of supporting huge hp. physicaly the pump can be capable of moving enough fuel for 1000+ hp. where as my current one can't support much more than 300hp worth, it also can't handle high rpm's very well.
anyways depending on the money situation i'm either gonna build up the new engine to hopefully around the 700hp mark.

or if money is a little tight then i'll just do some smaller mods on the current setup such as a major head port and probably hook up the nitrous kit that i've had for almost two years now.

plans are to get big power and then test the strength of the rest of the parts at the 1/4 mile and replace broken parts with stronger replacment parts
See less See more
1 - 4 of 75 Posts
Defiantly in the process of talking my wife into this one i wanna diesel Dakota lol what's your average hwy fuel mileage

Sent from my SPH-D710 using AutoGuide.Com Free App
also did you ever make a full write up on this im really trying to do this just need to find out what its going to cost, what problems you have had with the install, everything needed, specs on your flywheel and adaptor plate and what not that would be great thanks
Will that bolt up to the back of a 4bt and what's a round about cost

Sent from my SPH-D710 using AutoGuide.Com Free App
So the 74rh well bolt up to the 4bt or well i need an adapter

Sent from my SPH-D710 using AutoGuide.Com Free App
1 - 4 of 75 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.