[00RedRT]

Thank you all for the nice comments! My R/T has been a labor of love for the past three years and much like Charles, I too have modded it to suit my tastes. The best part is that it is very driveable as it has even made laps around Road Atlanta (110 mph on the back stretch :mullet: ) as well as the Auto-X course. It was my daily driver up until August, and it took me a little over a year to dial in the suspension to be a good 3/4 drop without rubbing anywhere. Looking forward to more modding in '06! :biggthump

 

[pressurized2]

Thank you all for the nice comments! My R/T has been a labor of love for the past three years and much like Charles, I too have modded it to suit my tastes. The best part is that it is very driveable as it has even made laps around Road Atlanta (110 mph on the back stretch :mullet: ) as well as the Auto-X course. It was my daily driver up until August, and it took me a little over a year to dial in the suspension to be a good 3/4 drop without rubbing anywhere. Looking forward to more modding in '06! :biggthump

i had a chance to check out this truck in person at the nopi nats and it was flawless very sweet job, good luck

 

[Hooedaddy]

:biggthump: My votes in Good luck to all!

 

[1SLOMOFO]

my vote is in :toast:

 

[DirtyR/T]

poll closes tomorrow.

 

[DakDrgn02]

Man this one was tough. I've been :drool: over these photos for 10 minutes tring to decide. No matter who wins, all of these trucks are worth winning.

 

[Gellys01R/T]

HOLY MOTHER OF MARY IS THIS A DAMN HARD MONTH!!!

After 20 minutes of looking over the pics I have put my vote in.

I just love the fact that I get to look at 2 sweet red trucks in the same thread!!

All of the trucks are awesome and I think Adam is trying to give us all heart attacks to start the new year... Thanks man... Geez.

I have a question for Darren though, where did you get all your powdercoating done? Also, is the coating on the rotors, chipping at all? Are you happy with it?

Ok, post over I need a beer after all the stress this voting has caused me... :mullet:

 

[00RedRT]

HOLY MOTHER OF MARY IS THIS A DAMN HARD MONTH!!!

After 20 minutes of looking over the pics I have put my vote in.

I just love the fact that I get to look at 2 sweet red trucks in the same thread!!

All of the trucks are awesome and I think Adam is trying to give us all heart attacks to start the new year... Thanks man... Geez.

I have a question for Darren though, where did you get all your powdercoating done? Also, is the coating on the rotors, chipping at all? Are you happy with it?

Ok, post over I need a beer after all the stress this voting has caused me... :mullet:

I get all my powder coating done locally at www.millerpowdercoating.com Great bunch of guys there and they have some of the best quality I've seen. As for the rotor hats, they are powder coated red but I have not seen chipping on them with the exception of some slight areas behind where the wheel mounts but thats it.

Thanks again for the kind words! :biggthump

 

[moparsz]

I think that we know who the winner is. Congtats 00RedRT

 

[BlackDak]

Woo Hoo!

Nice truck man!

 

[moparsz]

unless a mericle of 13 votes (or 29 votes not to leave Ace out) come in in the next 6 hrs

 

[na360rt]

unless a mericle of 13 votes (or 29 votes not to leave Ace out) come in in the next 6 hrs

ha, I think we could've all told you Darren was gonna win this thing before it was over. Myself, BlackDak, and ace were just here to give everyone a hardtime.

Darren, congrats man! How's my visors coming along? haha

 

[DAKSPORT1PA]

Congrats Darren. :biggthump

 

[00RedRT]

ha, I think we could've all told you Darren was gonna win this thing before it was over. Myself, BlackDak, and ace were just here to give everyone a hardtime.

Darren, congrats man! How's my visors coming along? haha

Hehehe, not true....I had some great competition with VERY worthy trucks, IMHO.

Oh and I have your visors almost done. Just need to get to them to my seamstress to sew up. (On pre-'00 models they get stitched up).

Thanks again guys! Some great people on here and very upstanding guys to have shared nominations with! :biggthump

 

[Gellys01R/T]

I get all my powder coating done locally at www.millerpowdercoating.com Great bunch of guys there and they have some of the best quality I've seen. As for the rotor hats, they are powder coated red but I have not seen chipping on them with the exception of some slight areas behind where the wheel mounts but thats it.

Thanks again for the kind words! :biggthump

Thanks for the info Darren! It's extremely helpful. When I get new rotors and a big brake kit, I'm thinking about doing the same to the rotors.
I hope you won't mind if I steal that idea for my Durango? It'll probably be in a year or so before I get that done.

Congrats to you on winning TOM! It's one of my favorite trucks EVER!

Oh BTW what's the turnaround time on the visors?

Thanks,
Gelly

 

[00RedRT]

Thanks again! :mullet: I can turn the visors in approx 2 weeks.

 

[Gellys01R/T]

Cool!!!

It's on my list of mods that will get done this year.

Not sure exactly when, but I'll let you know when I'm ready.

Thanks for the info!

Gelly