Dakota Durango Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
609 Posts
For the RCA inputs you will need to get a pair of line converters.These will need to bee tied into the rear speaker wires.Then run the RCSa from there to the amp.For the remote lead.Get out a test light.Look for an ignition controled wire.Use a wire tap to hook the wire into it.The Positive lead can be hooked up in the fuse box under the hood.Wire it to the terminal the positive battery led is going to.Dont forget to install a fuse in line.Under the hood.

Good Luck.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top