Dakota Durango Forum banner

Inexpensive mods for your Dodge Truck

99868 Views 47 Replies 32 Participants Last post by  phx
This thread has been created for people to give suggestions for how to improve the performance or cosmetic appearance of their Dodge Truck for under $50 and a bit of elbow grease.

This thread is dedicated for inexpensive tips - for those of you with "freebie" hints, use this thread instead:
1 - 1 of 48 Posts
Surprised none has mentioned the easiest freebie out there... remove that 1" flat piece of steel/stock plate with the hold-down bolt that keeps the top-hat air assembly mounted directly to the top of the throttle body and replace it with a threaded rod bent/shaped to match up the original offset pieces.. The removal of this horribly designed, air obstacle plate will smooth out the idle and help air flow thru-out rpm range
1 - 1 of 48 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.