Dakota Durango Forum banner

[HOW-TO][INTERIOR][Gen I Durango] Installing 3rd Row Seating

7289 Views 6 Replies 4 Participants Last post by  Snuffy
In this thread i will be sharing my experience with installing 3rd row seating in my 5 seater 98 Durango. It is a pretty basic conversion and is not hard at all. It would be even easier if you take the parts from a donor vehicle yourself so you know exactly how it goes without thinking lol.

Parts Needed:

  • Seat (4 Bolts)
  • Rear panels with belt access holes (6 screws)
  • Dual belt lock (1 Bolt and 1 washer)
  • Belts (4 Bolts, 4 screws and 2 bolt covers)

Tools Needed:

  • Sockets
    • 7/8
    • 5/8
    • 10mm
    • extension
  • Torx
    • T-45
    • T-30
    • T-15
  • Pliers
  • Philips screw driver
  • Flat screw driver

See less See more
1 - 1 of 7 Posts
The little cargo hatch behind the third row - How did you separate the backing from the rear of the seat from the top of the hatch?
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.