[HOW-TO][INTERIOR][2001-2003] Double-DIN Dash Modification

First off, I am a huge music fan, not a big fan of radio for various reasons –
I prefer to use a device that houses all of my favorites. I originally connected my Ipod directly to my factory deck, but soon realized that in order to browse my music, I needed to navigate from the Ipod itself, which is not legal in this province.

In looking for a new head unit, I wanted 4 things:

1. Ipod Sync
2. Bluetooth
3. Double DIN
4. Concealed Connections (no jacks on the face)

I wanted a double din and knew going in that it would need to be a custom install. After watching many Youtube videos, I decided this was something I may be able to do myself.

Please note: I am not a mechanic or an electrical guru. I removed and installed things that you may not want to do. This is written only from my own experience – this is not intended to be taken as the “right” way to do the install so please read this walkthrough first. I assume no responsibility for any damage you may cause to your vehicle.


Materials Required:

• New Double-DIN Head unit
• Antenna adapter – required for older vehicles
• Vehicle Specific Wiring Harness
• Bondo body filler
• Adhesive/ Epoxy
• Primer
• Plastic Paint
• Sand Paper 80 – 220 – 320 Grit
• Soldering Iron
• Solder
• Masking Tape
• Heat shrink Tubing
• Dremel Tool
• Metal cutting saw
• Drill bits
• Safety glasses
• Ventilated work area