Dakota Durango Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
31 Posts
The headlights is a small phillips head screw on the top right near the front of the lense. Turning right raises the light, while loosen/left lowers the light. Thats all you need to do. The bolts on the bottom just hold the light to the truck, they don't need to be touched. On the fogs, there is a bolt going up and down near the rear with a spring around it. Tightening that will lower your fogs, loosening will raise them.
I have a 2006 durango and have failed to find any adjustment screws other than the one underneath next to the 2 bolts that fasten the headlight.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top