[Lskiller]

Ok I have a 1995 dodge Dakota. It has been swapped to a 5.9 magnum. It is buil. .30 over 1.6 roller rockers small cam( had a little bigger one computer didn't like it) performance computer. Bigger throttle body. 24lb injectors. Mopar performance ported and polished heads. Headers. 4:56's and locker. Transgo shift kit. 2800-3000 stall. Cold air and cruise. I've busted every newer Camaro and challenger and mustang that's tried me. My buddy's scat pak challenger hung with me but I got him by almost a full length threw the quarter. I wanna carb swap it and stroke it and spray it. I already have the 408 Stroker kit. But what do I have todo to tranny to be able to carb it. I do have L/U and OD. Please let me know. Can I just wore a toggle in for the lock up since it has the button for OD?

 

[slammedR/T]

You will have to put OD and L/U on toggle switches, I assume you are removing the pcm completely?

Also what are some 1/4 mile times for this truck?

 

[Lskiller]

How do you wire the toggles for the OD and LU. And with the 360 how it was fuel injected I got 8.03 in the 1/8. Never ran the quarter with it.

 

[RalphP]

PATC hasn't fixed the link yet, but Archive.ORG has a backup copy of how to do it automatically:

http://web.archive.org/web/20160224164304/http://www.transmissioncenter.net/SwapInformation.htm

Gander through that and see what it gives you.

(It's actually written on replacing a 727 3 speed with a 518 4 speed; but the LU/OD switching is what you're looking for.)

RwP