Dakota Durango Forum banner

1 - 2 of 2 Posts
J

·
Guest
Joined
·
0 Posts
Discussion Starter #1
OK GUYS I HAVE JUST BOUGHT THE CERVINIS SNIPER KIT AND NEED TO PREP IT SO I CAN TAKE IT TO THE SHOP AND GET IT PAINTED. WHAT DO I NEED TO DO? I KNOW I NEED TO SAND IT, BUT WITH WHAT GRRADE OF SAND PAPER, WHAT SORTTA PRIMER AND SO ONE IF YOU CAN HELP ME OUT I WOULD APPRIATE IT. THANKS YALL
J-STAR :yourock: :toast:
 

·
Registered
Joined
·
35 Posts
its alot more work than most people think

yes you have to sand ans prime it. but before you even do that you will have to fit the peices onto the truck. the kit is fiberglass, correct? if its fiberglass there will likely be some fitting invoved. usually there isnt any holes drilled yet. the best thing to do is actually install the intire kit unpainted. make sure it fits good, then you prep. as for prepping i would sand it with 320 grit, prime it with any sandable automotive primer(probly do two caots. and then lightly sand the primer with 800 grit.
 
1 - 2 of 2 Posts
Top