Dakota Durango Forum banner
1 - 1 of 1 Posts

· Registered
71 Posts
Discussion Starter · #1 ·
First off. While researching the 4.7 alot of you are running 08 parts on the top end. (Cams and intake ). Could I use a pistons for 08 With 01 heads then as well find the cams and intake maybe heads later

My block is a little galded on one cylinder. Was going to have it bored .020 would I be better finding a different block. I also see sleeves. Any one with experience with them.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.