Dakota Durango Forum banner

FYI - Items to avoid purchasing

40494 Views 76 Replies 47 Participants Last post by  Letricblue
1) The Turbonator - the way air/fuel travels through the Magnum motor would probably cancel out any effect items like this would even remotely achieve.

2) Throttle Body Spacers - the way air/fuel travels through the Magnum motor would probably cancel out any effect items like this would even remotely achieve.

3) Any +hp "chip" from E-Bay/etc. They are just ten-cent resistors which replace the IAT sensor and attempt to fool the PCM into thinking the temperature of the air entering the engine is cooler or hotter than it really is, which supposedly slightly leans/richens the air/fuel mix going into the engine. Most of these people probably have no clue whatsoever what resistance value equals what temperature for the Dodge Dakota/Durango, and the mod itself does very little to begin with.
1 - 2 of 77 Posts
4) Any thing from AIM industries- they very poor products quality and even worse customer service (if you are even able to get a hold from them). They are also not knowledgeable about the products they carry.
2YuNg2Di said:
so how much hp would i get for my SLT if i swapped out the badges with an R/T?? then added a couple HEMI ones?? :drive: :jester: :jester:
Not as much as me when i slap a 30" NOS sticker on my air tank :eek:nethumb:
See less See more
1 - 2 of 77 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top