The console includes a pigtail with short wire leads. There is plenty there to splice onto so you can extend the wires under the headliner to your A-pillar, then down to the fusebox & ECM, where you can pick up all the necessary signals.
I've done this, so I know the details. If you want it, I'll extend the wires and label them for you, so it'll be a breeze to hook up.
If you already have a console with lights, the light harness will plug right in.
The computer only needs 4 wires:
1) Battery + (fusebox)
2) GND (ring terminal to bolt near fusebox)
3) Data (CAN) tap into wire at ECM behind kick panel)
4) Keyswitch (IGN) (fusebox)
In my '03, the dimming is handled via the data bus, so no dimmer wire was required.
Looking at the computer
Hey so looking at the computer picture at the top, which one is pin 1? Right side (that has the red wire) or left side?The console includes a pigtail with short wire leads. There is plenty there to splice onto so you can extend the wires under the headliner to your A-pillar, then down to the fusebox & ECM, where you can pick up all the necessary signals.
I've done this, so I know the details. If you want it, I'll extend the wires and label them for you, so it'll be a breeze to hook up.
If you already have a console with lights, the light harness will plug right in.
The computer only needs 4 wires:
1) Battery + (fusebox)
2) GND (ring terminal to bolt near fusebox)
3) Data (CAN) tap into wire at ECM behind kick panel)
4) Keyswitch (IGN) (fusebox)
In my '03, the dimming is handled via the data bus, so no dimmer wire was required.
