[MadMike05]

,,.,

 

[bwboley]

Thought i might up date bought some brand new 33 12.5 15 firestone m/ts
well they rub if i have 7 people in it also any off road flex but few ppl and on the road is fine

back wheels

had to trim the flare or it rip off again

 

[4x4durango]

I have a durango. I want to put 33's. But for now im going to put a 3inch body lift on it. Do you think 33's would fit. or go with 31's to be on the safe side.?

 

[RJ_Hythloday]

I have a durango. I want to put 33's. But for now im going to put a 3inch body lift on it. Do you think 33's would fit. or go with 31's to be on the safe side.?

I've got 31's w/ nothing, but every one seems to say you need 3" bl and the torsion bars cranked to fit 33's w/ out rubbing.

 

[4x4durango]

Thats what i was thinking. But you have 31's stock.? Did you have to trim anything or what? What year is it. I have a 2000 dodge durango. The wheel space seems very tight.

 

[RJ_Hythloday]

Thats what i was thinking. But you have 31's stock.? Did you have to trim anything or what? What year is it. I have a 2000 dodge durango. The wheel space seems very tight.

Mine's a 99, but my old neighbor also had 31's on his stock 2000. No trimming should be needed, but might not hurt.

 

[4x4durango]

alright cool thanks, yea I will try putting them on first and then see if need i will do.

 

[4x4durango]

bwboley, looks nice man, and thats stock wheels on it? did you just paint them. It looks nice i might go with that look. So you trimming might be necessary? i think i might go with 31's

 

[Alpine247]

u can go with 265/75/16s pretty much a 32" tire with no rubbing at all.

 

[4x4durango]

alright cool thanks, il check into those. About how much would some nice wheels be? not to expensive. any idea anyone?

 

[bwboley]

bwboley, looks nice man, and thats stock wheels on it? did you just paint them. It looks nice i might go with that look. So you trimming might be necessary? i think i might go with 31's

yea stock rims scuffed up and painted i think satin black or semi gloss cant rember but was dupicolor

 

[jrm6623]

Finally had a chance to test out the 33's on the Durango down in Moab Utah last week.

 

[RJ_Hythloday]

Finally had a chance to test out the 33's on the Durango down in Moab Utah last week.

http://www.youtube.com/watch?v=AjkbkB5ri8Y

You've got 33's and only 2" lift? t/s or body?

Some friends used to run a family pizza place down in Alpine, and a locksmith. Getting my dango back tomorrow.

 

[dodge35]

hey is anyone on here

 

[RJ_Hythloday]

hey is anyone on here

nope

 

[infernosrt]

super helpfull thread thanks man

 

[jrm6623]

@ RJ_Hythloday

You must be talking about the Petersons with Alpine Lock and Safe!

I helped them build their first office in American Fork after an old sporting goods store closed up. They were my neighbors for years before they moved.

John

 

[jack Buaer]

here is my rig with 33s on a 5.5 suspension lift.

Specs:
TC 5.5 IFS lift
33x12.5 15 Goodyear Wrangler Kevlar tires
15 in 6.4 Rims (steel)
RideEffex Helper Springs (3000#s)
Winch 12,500#s
Dual battery
1500WATT Inverter (120v outlets inside)
Ham UHF VHF Am FM CB Radio
Clinometer
On board Air compressor 100% duty cycle 120PSI 5Gal tank
New Transfer case
New Transmission
New upper ball joints (Super Duty)
New Tie Rods inner and outer (Moog)
New Lower Ball Joints (super duty)
New Rotors
New Calipers
e-locker (Rear) 9.25
On board Fire extinguisher (Chem)
Iron bull bumper from Ironbulljumpers.com
Plugs Bosch +4
EdelBrock 10 in Air filter
Custom made electrical sub station with computer control monitoring, used a HP dv7 Laptop removed screen and installed 10 in LCD touch screen monitor and Wireless 104 key mini keyboard, wrote software to interface with data connection and computer of the truck to monitor performance and really nice to have INTERNET access with Wirelss or tethering cell phone.

Onboard dash cam please note, Video doesn't show how steep the hills are since this is a Dash Cam
(sample video at youtube

Left to do:

Rear bumper I am making myself (Dual Jerry cans , Spare tire, winch, able to carry spare axles)
Replace front shocks with Reservoir Pro Comp and rear with Reservoir Pro Comps MX6
1/4 steel plate for under armor to cover transfer case and Gas tank (Sad news is 1sqft = 10 pounds so I am looking at 300 pounds more)
Making the Top roof mount light bar will post pics once I finish, they are a mix of Sunbeams and LEDS 50Amps total
Engine Rebuild kit upgrades with Mopar using Extreme performance High torque RV tow cam (318 5.2L)
Viper remote ignition alarm system with Iphone app Custom voice (with count down "Self Destruction in 10, 9, 8, 7, 6 ....) in to days world people may just believe it.
Replace clutch Fan with Dual Electric Fans
Increase transmission cooling coils to a bigger foot print.
Going true dual exhaust with flange connections so i can put in the joining pipe for the cat when need to smog.

Updated Pics after Leaf Srping helpers:

 

[Derbango]

Now that is the best set up in this thread so far, details, details.

 

[jack Buaer]

Now that is the best set up in this thread so far, details, details.

Just posted the details and new pic