draging and locking up front left caliper

851 Views 1 Reply 2 Participants Last post by der Mond, Jun 26, 2021

daksarelemons

Discussion Starter · Oct 23, 2020

So i have a 02 dak 2wd 9inch drum replaced the calipers, rotors, flex hose, master cylinder, and bled the system,yetstill locks up. Even replaced the drums, wheel cylinders, hardware, and shoes in the back. What could it be, im going to replace the steel line and union going to the front left wheel since thats the only thing left. This is so frustrating, how can you have brake issues, esp after you replace everything. its only the front left caliper

Save

1 - 1 of 2 Posts

der Mond

· #2 · Jun 26, 2021

daksarelemons said:
So i have a 02 dak 2wd 9inch drum replaced the calipers, rotors, flex hose, master cylinder, and bled the system,yetstill locks up. Even replaced the drums, wheel cylinders, hardware, and shoes in the back. What could it be, im going to replace the steel line and union going to the front left wheel since thats the only thing left. This is so frustrating, how can you have brake issues, esp after you replace everything. its only the front left caliper

You have to grind smooth the steering knuckle slide rails. That is where the pads hang up.

Save

1 - 1 of 2 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month