Dakota Durango Forum banner
1 - 1 of 4 Posts

· Registered
9 Posts
I work for the company that makes this switch. the board is called HBLX Board and there are about 4 different kinds of boards but all work the same. only diff is if you have fog lights dak, dingo or ram (cargo light or not etc) these switches have been giving us hell. the main switch was falling off on some of the boards and I personally had to reflow (temp where the solder melts) them because the solder joints were only reflowing for 9 seconds insead of 60 seconds and causing major problems. dont know if you got a bad batch because of our ovens but it sounds like it.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.