Dakota Durango Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I need help figuring out where my coolant is leaking out of in my 1988 3.9l dakota
110870
. The coolant is pooling on top of the engine and I don't see a leak from any of the hoses. I haven't had any problems before with leaks but about a week ago I saw it was getting low so I filled the reservoir up and the radiator was still full but today I went to check on it and the reservoir and the radiator was both empty.
 

· Registered
1988 Dodge Dakota LWB RC 3.9V6 3 speed auto
Joined
·
1,628 Posts
Rent a pressure tester.

Pressurize to 16PSI.

I'll bet that bypass hose, which looks cracked from here, has a small leak under pressure. For now; later it'll suddenly blow wide open.

ahem

Not that I'm saying that's happened to me ... but it did.

RwP
 

· Registered
1988 Dodge Dakota LWB RC 3.9V6 3 speed auto
Joined
·
1,628 Posts
Also, dry it out completely.

Then take the cheapest foot powder you can find in a spray can, and spray it over that area.

That way, you can find the tell easier (by where it gets wet).

RwP
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top