anyone wanna trade me something for my chrome westin nerf bars??
looking for a painter to do some work...or anything good..
looking for a painter to do some work...or anything good..
Barter Thread
Post the stuff you want to sell or trade, or what you're looking for and willing to trade.
21 - 40 of 199 Posts
Still have the headers?????? i have a set of stock rims with new tires on them i will let go.......slammedR/T said:Got a set of PPH headers without the Y-pipe would like to trade for a set of 15X8 dakota wheels the 10-spoke ones don't need tire with them.
DEPUTY
I have.....
Sport Coil Springs
Sport Leaf Springs
Class III Tow Hitch
Stock Air Box Assembly(no air hat or front tube)
Basically brand new Fram Airhog Air Filter
5.2/5.9 Exhaust Manifolds
3.9/5.2/5.9 Stock Crank Pulley
That is all I can think of right now. I will sell them or trade them for performance parts or dress up parts with extra cash if needed.
Sport Coil Springs
Sport Leaf Springs
Class III Tow Hitch
Stock Air Box Assembly(no air hat or front tube)
Basically brand new Fram Airhog Air Filter
5.2/5.9 Exhaust Manifolds
3.9/5.2/5.9 Stock Crank Pulley
That is all I can think of right now. I will sell them or trade them for performance parts or dress up parts with extra cash if needed.
Nevermind, i picked up an amp today.
I may have an amp with similar specs to what you need, I'll check on it tonite. Not much that I really need other than $$Brian22 said:I have tons of stuff for trade, everything from
altezza ram tail lights
chrome r/t center caps
mopar performance gaskets
5" off road lights
I'm looking for a Mono Amp that puts out 200w at 4ohms
Brand and condition will determine what i'm willing to trade.
Durango factory hitch
5.2/5.9 exhaust manifolds
5.2/5.9 intake manifold
factory intake (full)
2000+ fan shroud with bottles built in
15x8 wheels with Goodyear Wrangler tires
5.2/5.9 exhaust manifolds
5.2/5.9 intake manifold
factory intake (full)
2000+ fan shroud with bottles built in
15x8 wheels with Goodyear Wrangler tires
Hmm
Is the Fan Shroud the same as the 4.7 one.
If so How Much to 07403
STeve
Is the Fan Shroud the same as the 4.7 one.
If so How Much to 07403
STeve
I'd like to get $50 for it. Shipping, I'm not sure. I'm at 11354FSTDANGO3 said:Is the Fan Shroud the same as the 4.7 one.
If so How Much to 07403
STeve
Center seat.
Outa my '99 R/C R/T.
Agate in color, great condition (~70k miles on truck)
$50 OBO + Shipping
Comes w/ seatbelt etc.
Pics if needed, but you've seen one you've seen them all.
Mark
Towards Line of fire w/ ice
Maybe some non factory tail lights.
Hotchkiss.
Performance parts for 5.9
Seats
Outa my '99 R/C R/T.
Agate in color, great condition (~70k miles on truck)
$50 OBO + Shipping
Comes w/ seatbelt etc.
Pics if needed, but you've seen one you've seen them all.
Mark
Towards Line of fire w/ ice
Maybe some non factory tail lights.
Hotchkiss.
Performance parts for 5.9
Seats
I have a 15x8 with a 31x10.50 spare. Need something with a total of 28" and fits 6x4.5 pattern.
Looking for 1" drop coils or stock R/T coils. Near or around Central,FL.
Thanks!
Thanks!
Two 15x7 aluminum wheel caps (one in perfect conditon other has couple scratches)
Two 16" SLT rim caps. Both in great shape.
SEND PM...pay shipping...and they're yours :twothumb:
Two 16" SLT rim caps. Both in great shape.
SEND PM...pay shipping...and they're yours :twothumb:
I need a HU Alpine CDA-9885 or simlar
And a K&N Filter for a stock 5.9 air intake
I have:
Chromie 17"s R/Ts with caps
Stock Exaust, Turn sigs, HU
and a K&N COI with heatshield
Back silver R/T bumper *OWNED*
Xeon Spolier
[email protected]
And a K&N Filter for a stock 5.9 air intake
I have:
Chromie 17"s R/Ts with caps
Stock Exaust, Turn sigs, HU
and a K&N COI with heatshield
Back silver R/T bumper *OWNED*
Xeon Spolier
[email protected]
My 17" R/T rims with 265/70 goodyear wrangler st's at about 75-80% tread with a perfect balance. For... 20's? bigger? Smaller? I just seeing whats out there. I really like these but something that I also like might make me get rid of them.
SONY PS3 60GB only played 1 game on it, looking for a Moore SRT Hood. nethumb:
nethumb:Still looking for different rims for my truck ( see above) Id also be willing to trade for 17's and we can swap tires! Comon guys!
Drivernumber22 said:I need a HU Alpine CDA-9885 or simlar
And a K&N Filter for a stock 5.9 air intake
I have:
Chromie 17"s R/Ts with caps
Stock Exaust, Turn sigs, HU
and a K&N COI with heatshield
Back silver R/T bumper *OWNED*
Xeon Spolier
[email protected]
Trade ya a K&N filter for the chrome 17s? LOL
I have a stock Air Hog filter with very little miles on it. I payed $46 for it Ill sell it to ya for $15.Drivernumber22 said:I need a HU Alpine CDA-9885 or simlar
And a K&N Filter for a stock 5.9 air intake
I have:
Chromie 17"s R/Ts with caps
Stock Exaust, Turn sigs, HU
and a K&N COI with heatshield
Back silver R/T bumper *OWNED*
Xeon Spolier
[email protected]
If any one has a roll pan they wanna trade for a painted bumper hit me up.
I have a brand new 245/35/20 tire if anyone is intersted.
Trade ARE Tonneau for Roll Top Tonneau
Have a ARE Fiberglass LSII Tonneau its currently on my 1997 Club Cab, Gas hinges, lockable (theftproof) and it is carpeted on the underside. Its painted Moss Green, the paint could be in better shape, but a clay bar and a good wax would bring it back to life. (it has some small paint chips near the key latch)
I'll have actual pics of it in a day or two once it finally stops raining.
Looking to trade it for a
Roll n Lock
Pace Edwards Jack-Rabbit
Retrax
or a Peragon Tonneau
I really want a Roll n Lock or a P.E. Full Metal Jack-Rabbit
Mine looks just like this one, except its painted green and it fully carpeted on the underside.
http://dakota-durango.com/parts/hardtonneaus/are02.jpg
http://dakota-durango.com/parts/hardtonneaus/are03.jpg
http://dakota-durango.com/parts/hardtonneaus/are04.jpg
Have a ARE Fiberglass LSII Tonneau its currently on my 1997 Club Cab, Gas hinges, lockable (theftproof) and it is carpeted on the underside. Its painted Moss Green, the paint could be in better shape, but a clay bar and a good wax would bring it back to life. (it has some small paint chips near the key latch)
I'll have actual pics of it in a day or two once it finally stops raining.
Looking to trade it for a
Roll n Lock
Pace Edwards Jack-Rabbit
Retrax
or a Peragon Tonneau
I really want a Roll n Lock or a P.E. Full Metal Jack-Rabbit
Mine looks just like this one, except its painted green and it fully carpeted on the underside.
http://dakota-durango.com/parts/hardtonneaus/are02.jpg
http://dakota-durango.com/parts/hardtonneaus/are03.jpg
http://dakota-durango.com/parts/hardtonneaus/are04.jpg
21 - 40 of 199 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Dakota Durango Forum
A forum community dedicated to all Dodge Dakota and Durango owners and enthusiasts. Come join the discussion about modifications, troubleshooting, towing capacity, maintenance, and more!
Full Forum Listing
