Sent you a PM.On my 2000, though supercharged, I have my intercooler supported by the blower and air hat via rubber hoses. You should be fine with just supporting the other end of the intercooler to the cold side. I would not add any support to the chassis/body because it will want to move separately from the motor.
Air to water IC mounting
Installed a turbo on the passenger side of my 5.2l dakota. Trying to mount the A2W intercooler on the same side since it has the outlet out the left side toward the "carb hat" and the inlet is toward the front. My intercooler is connected to the carb hat via aluminum v-bands (no rubber tube) so my concern is supporting the weight of the intercooler by mounting to the inner fender. Being rigidly mounted to the intake, should the intercooler be secured to the inner fender via rubber mounts? If so, anybody do this before and have suggestions for damper/mounts? Thanks.
1 - 2 of 4 Posts
Sent you a PM.
1 - 2 of 4 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Dakota Durango Forum
A forum community dedicated to all Dodge Dakota and Durango owners and enthusiasts. Come join the discussion about modifications, troubleshooting, towing capacity, maintenance, and more!
Full Forum Listing
