Dakota Durango Forum banner
1 - 1 of 1 Posts

·
Your hero
Joined
·
438 Posts
Back all of the rockers off and follow this chart...



Make sure the lock in the center of the nut is backed all the way out too. Drop the rocker on and turn the nut to where the pushrod will not go up and down and then give an extra 1/2 to 3/4 turn (I would go 1/2 turn in your case) then use a wrench to hold that in place and tighten the allen head so it locks. That should have them set perfect. Just be sure to follow the chart.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top