Dakota Durango Forum banner
1 - 2 of 2 Posts

· Premium Member
14,342 Posts
All it takes is a T-20 torx bit to get the stock corners off, and a 10mm socket for the three bolts holding the headlights in. You will have to remove your bumper to get the 1-piece headlights in, which is 18MM for the top ones on the frame, and probably the same for the side brakets, but I don't have them anymore so don't know.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.