Dakota Durango Forum banner

'99 Front End

1523 Views 5 Replies 4 Participants Last post by  Chasing wires for days
'99 Dak Front End

I'm about to tear into my front end to replace both sides of ball joints and inner tie rod ends. Any suggestions or warnings?? '99 Dak 4x4 Sport
1 - 2 of 6 Posts
'99 Dak front end

It's a Dakota with approximately 135000 miles. 4x4 Sport model. I just jacked it up and was poking around. Not looking good. The upper ball joint is factory riveted in place so I would have to "cut or hack" the rivets off just to the darn thing off. Also, it apears that the rotor will have to be removed along with all components that are attached. Not sure I'm willing to dive into this.
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.