Dakota Durango Forum banner
1 - 2 of 2 Posts

·
Bippity Boppity Buppity
Joined
·
379 Posts
Well I did a swap of a 99 360 into my 92. There is a little bit more than has been said that is involved but it is easy and straightforward. You will want the manifolds from your 92 as they are larger. As long as your sensors from the 318 motor are not shot swap them into the 360... if shot replace. All the wiring is the same. You will the the harmonic balancer from the 360 motor. The 318 is internally balanced... the 360 externally hence why you need it. You will have to grind one of the four holes slightly to get it to bold up the the torque converter but it will work. You might try to find a Mopar PCM for a 93-95 360 or 92-95 318. Your current computer will run it but it might be lean.
 

·
Bippity Boppity Buppity
Joined
·
379 Posts
Well I did a swap of a 99 360 into my 92. There is a little bit more than has been said that is involved but it is easy and straightforward. You will want the manifolds from your 92 as they are larger. As long as your sensors from the 318 motor are not shot swap them into the 360... if shot replace. All the wiring is the same. You will the the harmonic balancer from the 360 motor. The 318 is internally balanced... the 360 externally hence why you need it. You will have to grind one of the four holes slightly to get it to bold up the the torque converter but it will work. You might try to find a Mopar PCM for a 93-95 360 or 92-95 318. Your current computer will run it but it might be lean.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top