Dakota Durango Forum banner
1 - 3 of 3 Posts

· Banned
Joined
·
782 Posts
On the bottom left corner of the TB is a idle adjuster for better words. It controls the spacing / how far the throttle cable returns back. Lemme see if I got a picture for you.. but I had the exact same problem as you did.. Look for a little hole, possibly covered up with a cheap aluminum cap. Punch it out with an awl.. and then behind there is a torx screw that controls the position of the return lever.

Like I said, lemme see if I can find a picture...
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top