Dakota Durango Forum banner
1 - 1 of 1 Posts

· Registered
290 Posts
You need to remove the lower (center) piece of the dash. There should be an extra wire in there with some foam wrapped over the end. Unlpug the harness from the lighter element, and plug in this foam wrapped wire (after removing the foam of course. now you will have constant power supplied to your cell charger/lighter. Just be careful not to leave something hooked up for too long, or you could drain the battery.

Should only take 5 minutes to do.

You may want to use some goo gone on the "wrapped" plug, the sticky residue makes it hard to plug into the element!

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.