Awesome swap if you can get your hands on all of the parts.
03-04 front brake upgrade
I'm planning on doing a brake upgrade on my 01 R/T and have a few questions. I've tried searching on here and couldn't find my answers, but it may be also that I'm very tired.. Anyways my questions:
1. Parts, r these all the parts I need or am I missing something?
a. 03-04 Spindles
b. 03-04 calipers w/ brackets
c. rotors, pads
d. 03-04 brake lines (plan on using goodridge SS lines)
2. Will any caliper from an 03-04 Dakota work? Like would a caliper from a 6 cyl 4x4 work on my 8 cyl 4x2? Same goes for Spindles
3. I've read on another site someone saying 03-04 Dakotas have a different master cylinder than say my 01. Is this true?
4. I looked and looked and couldn't find a write-up/ how to on installing this. Does anyone know where I can find one?
5. Thank you for the help!
1. Parts, r these all the parts I need or am I missing something?
a. 03-04 Spindles
b. 03-04 calipers w/ brackets
c. rotors, pads
d. 03-04 brake lines (plan on using goodridge SS lines)
2. Will any caliper from an 03-04 Dakota work? Like would a caliper from a 6 cyl 4x4 work on my 8 cyl 4x2? Same goes for Spindles
3. I've read on another site someone saying 03-04 Dakotas have a different master cylinder than say my 01. Is this true?
4. I looked and looked and couldn't find a write-up/ how to on installing this. Does anyone know where I can find one?
5. Thank you for the help!
1 - 2 of 33 Posts
All you need is 03 or 04 brake lines, they fit.
15's will not clear the brakes, 16's or larger are what you need.
15's will not clear the brakes, 16's or larger are what you need.
1 - 2 of 33 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Dakota Durango Forum
A forum community dedicated to all Dodge Dakota and Durango owners and enthusiasts. Come join the discussion about modifications, troubleshooting, towing capacity, maintenance, and more!
Full Forum Listing
